1. kamerák
  2. Car Audio & Electronics
  3. Home Audio
  4. Personal Audio
  5. TV-k
  6. Okos otthon
  >> Elektronikai Technológia Online >  >> Car Audio & Electronics >> Autó hangszórók és mélynyomók

Mi a különbség a mélysugárzó és a mélysugárzó között?

Ha Ön egy autós audio rajongó, előfordulhat, hogy hallotta már a „woofer” és a „subwoofer” kifejezéseket felcserélhetően használva.

De mi a tényleges különbség köztük? Nézzük meg.

A mélysugárzók 30 hertz alatti frekvenciákat reprodukálnak, míg a mélysugárzók a 60 és 2000 hertz közötti alacsony és közepes frekvenciatartományt fedik le. A mélysugárzók nagyobbak és nehezebbek, mint a mélysugárzók, és több energiát igényelnek a működésükhöz, gyakran egy dedikált erősítőről.

Az alábbi cikkben részletesebben megvizsgálom a mélynyomók ​​és a mélysugárzók közötti különbséget, beleértve a legfontosabb jellemzőiket, előnyeiket és hátrányaikat.

Mélysugárzók és mélysugárzók:mi a különbség?

Ami az autós hangzást illeti, sok kifejezést dobnak körbe. Két, amit valószínűleg hallottál, a „mélynyomók” és a „mélynyomók”. De pontosan mi a különbség a kettő között?

A mélysugárzók olyan hangsugárzók, amelyeket kifejezetten alacsony frekvenciájú hangok reprodukálására terveztek. Ezek a frekvenciák általában körülbelül 60 és 2000 Hz között vannak.

Ezen alacsony frekvenciák előállításához a mélysugárzóknak sokkal nagyobbaknak és nehezebbeknek kell lenniük, mint a magassugárzóknak vagy a középkategóriás hangsugárzóknak (amelyek a mélysugárzóknál magasabb frekvenciákat reprodukálnak).

Másrészt a mélynyomókat kifejezetten arra tervezték, hogy nagyon alacsony frekvenciákat reprodukáljanak, gyakran 30 Hz alatt.

Ezek a frekvenciák olyan alacsonyak, hogy az emberi hallás tartománya alatt vannak. A rezgéseiket azonban továbbra is érezhetjük, különösen a 20 Hz-es vagy az alattiakat.

Mivel a mélysugárzók ilyen alacsony frekvenciákat reprodukálnak, szilárd burkolatokba kell őket beszerelni, és csak ritkán rakják be csomagtartóba szabad hatótávolságú mélynyomóként.

A szabad hatótávolságú mélynyomók ​​ritkák az autós audiorendszerben, és nem olyan jól teljesítenek, mint a tömör burkolatokban lévő mélynyomók.

Ha mélynyomót szeretne hozzáadni autójának audiorendszeréhez, javasoljuk, hogy tekintse meg a Skar oldalt. (link az Amazonhoz).

Hogyan működnek a mély- és mélysugárzók?

A mélysugárzók és a mélysugárzók hasonló módon működnek, a fő különbség a méretben és a frekvenciatartományban van.

Mindkét meghajtó fogadja az erősítő jelét, hanggá alakítja, majd hanghullámokat bocsát ki.

Mind a mély-, mind a mélysugárzóknak erősítőre van szükségük a megfelelő működéshez. Ennek az az oka, hogy a rádió alacsony frekvenciájú jeleket küld, amelyeket a hangsávokon alacsony frekvenciájú effektusoknak (LFE) neveznek, elektromos áramon keresztül az erősítőhöz.

Ezután az erősítő felerősíti az áramot, és egy mágneses tekercsen keresztül hanggá alakítja, ami a meghajtókúp rezgését okozza.

A mélysugárzók kisebbek, mint a mélynyomók ​​(bár egyes mélynyomók ​​6,5 hüvelykes vagy 8 hüvelykes kivitelben készülnek), és a 60 Hz és 2000 Hz közötti frekvenciatartományban működnek.

Középmély hangfrekvenciákat állítanak elő, főként beépített autóajtó-hangszórókat, és rendelkezhetnek koaxiális vagy komponens hangszórókkal. A mélysugárzó egy kúpot használ, amely az egyetlen tekercsrugóra van rögzítve. A kúp mérete határozza meg azt a frekvenciatartományt, amelyet a mélysugárzó sugározhat.

A mélysugárzók viszont nagyobbak, és 20Hz-200Hz frekvenciatartományban működnek. Ennek eredményeként alacsony basszusfrekvenciákat állítanak elő, és autókban használják a hangminőség javítására.

A mélysugárzó erősebb kúpokat használ, amelyek típustól függően kör vagy négyzet alakúak lehetnek, például Kicker L7 Serie (link az Amazonhoz).

Ellentétben a mélysugárzókkal, amelyeknek csak egy hangtekercse van, a mélysugárzóknak egy tekercse (SVC) vagy két hangtekercse (DVC) lehet, ami befolyásolja a teljesítményüket és a basszus minőségét.

Mélynyomó kontra mélynyomó:melyik a megfelelő az Ön számára?

Attól függ, hogy mit keresel egy hangszóróban, de egy megfelelően megtervezett autós audiorendszerben mindkét típust telepíteni kell.

A mélysugárzó akkor megfelelő, ha olyan hangszórót szeretne, amely közepes mélyhangokat produkál.

A mélynyomó azonban a jobb választás, ha olyan hangszórót keres, amely a legalacsonyabb basszusfrekvenciákat produkálja.

Íme egy táblázat, amely összefoglalja a mély- és mélysugárzók közötti különbséget:

Mélysugárzók

  • Közép-mély frekvenciák
  • 60Hz-2000Hz frekvenciatartomány
  • Koaxiális vagy komponens hangszóró kialakítás
  • A kúpok egyetlen tekercsrugóra vannak rögzítve.
  • A kúp mérete határozza meg a frekvenciatartományt.

Mélynyomók

  • Alacsony mélyhangfrekvenciák
  • 20Hz-200Hz frekvenciatartomány
  • Eltérő számú hangtekercs lehet
  • Kör vagy négyzet alakú kúp alakú
  • A kúpok robusztusabbak, mint a mélysugárzók.

A mélynyomó előnyei az autóban

A mélysugárzók számos előnnyel járhatnak autója audiorendszerében, többek között:

Woofers reproduce mid-bass frequencies that are responsible for creating full and rich sound. This can significantly improve the overall sound quality of your car’s audio system.

#2. Improved Soundstage:

Woofers can help create a wider and more spacious soundstage. This is because mid-bass frequencies are responsible for giving sounds their directional cues from the speakers on both sides of the car.

#3. Tighter Bass:

Woofers can provide tighter and better-defined mid-bass as compared to subwoofers. This is because woofers have a smaller cone surface area, which results in less cone flex.

The Benefits of Having a Subwoofer in Your Car

Subwoofers can provide a number of benefits to your car audio system, including:

#1. Enhanced Bass:

Subwoofers are designed to reproduce low-bass frequencies. This means that they can provide enhanced bass as compared to woofers.

#2. Improved sound quality:

The enhanced bass that subwoofers provide can also improve sound quality because the low-bass frequencies are responsible for giving sounds their fullness and richness.

#3. Improved soundstage:

Subwoofers can also help create a broader and more spacious soundstage.

The low-bass frequencies make the space better filled with low-end sounds.

Can I Use a Woofer as a Subwoofer?

You cannot use a woofer as a subwoofer because woofers are designed to reproduce mid-bass frequencies, while subwoofers function by reproducing the lowest frequencies.

You can have several woofers installed in the car, even as standalone drivers in dedicated enclosures, but although they will create strong and clear mid bass, they will not be able to make the same low-end sound as a quality subwoofer.

How to Install a Woofer in Your Car

Installing a woofer in your car is a relatively simple process and is not much different from installing standard coaxial speakers in the car:

#1. The first thing you need to do is to remove the trim panel on the door. Once the trim panels are removed, you can access the speakers.

#2. Next, unscrew the speakers from the door panel and disconnect the wires. Once the cables are detached, remove the speakers from the door.

#3. Now, connect the wires to the new speaker. Once the cables are connected, you can place the new speaker on the door and screw it to the door panel.

Finally, you must reassemble the door panel and screw it back.

How to Install a Subwoofer in Your Car

Installing a subwoofer in your car can be a bit more challenging than installing a woofer, but it is still a relatively simple process:

#1. The first thing you need to do is to find a suitable location for the subwoofer. The trunk is often the best location for the subwoofer.

#2. Next, you must select the subwoofer’s amplifier and connect it to the battery and stereo via remote wire.

#3. Finally, you must run the wires from the subwoofer to the amplifier. The best way to do this is to use a speaker wire of adequate gauge.

Do I Need an Amplifier for My Woofer or Subwoofer?

An amplifier is not required for a woofer, but it is recommended. When it comes to the subwoofers, an amplifier is a must unless you use a powered (active) subwoofer.

This is because amplifiers can provide more power than no car stereo can achieve.

Having a subwoofer without an amplifier will not give you any good bass.

The subwoofer will work, but it won’t produce any sounds you want to hear. Instead, there will be just a faint rumble.

What Size Woofer or Subwoofer Do You Need for Your Car?

The woofers have a standard common size of 6.5″, which can be installed in most cars without any fitment issues.

The subwoofers have a bit more diverse size options, and their size actually depends mainly on the size of the trunk. The most popular and standard sizes are 10″, 12″, or 15″ with either single or dual enclosure designs.

If you have a smaller car, I recommended to go with a 10″ subwoofer. If you have a larger car, such as an SUV, it is recommended to go with a 12″ or 15″ subwoofer so the cabin can be better filled with the low frequencies.

Also, a larger subwoofer can naturally create more SPL (sound pressure level), so it will be easier to reach higher volumes without distorting the sound.

How Much Does a Woofer or Subwoofer Cost?

The woofers can cost anywhere from $30 to $200, depending on the quality and features. As for the subwoofers, they can cost anywhere from $100 to $1000, again depending on the quality and features.

For the woofers, there is no need to spend a lot of money unless you are looking for high-end models, and the vast majority of woofers are combined with tweeters in either coaxial or system design.

The subwoofers, on the other hand, can be quite expensive, but it is worth it if you want to create a quality sound system in your car.

The simplest way to get a solid and deep bass is to buy a quality, ready-made subwoofer set with a loaded enclosure, designated amplifier and all the wiring.

An excellent example is the SKAR Single SDR Package (link to Amazon).

This package has several main pros over similar products:

  • Strong and deep bass
  • One of the cheapest sets on the market
  • Clear installation diagram
  • Easy set-up

Troubleshooting Your Woofer or Subwoofer

If the woofer or subwoofer is not working correctly, there are a few things you can do to try and troubleshoot the problem:

#1. Check all the wiring connections and make sure they are tight and secure.

#2. Ensure the stereo and amplifier are turned on and set to the correct volume.

#3. Check all the fuses and replace them if necessary.

#4. Check the amplifier’s gain setting and ensure it is set correctly.

If, after checks, you still have a problem with the sound coming from the woofer or the subwoofer, you may need to take it to a professional to have a look at it.

FAQ

What Is the Difference Between a Woofer and Subwoofer?

The main difference between a woofer and a subwoofer is that a woofer covers frequencies between 60 Hz to 2 kHz, while a subwoofer covers frequencies between 20 Hz to 200 Hz.

Additionally, woofers are typically larger than subwoofers.

Can I Use a Subwoofer Without an Amplifier?

You will need an amplifier to power the subwoofer. Without an amplifier, the subwoofer will not produce any sounds you want to hear.

What Size Woofer or Subwoofer Do I Need for My Car?

Most woofers have a standard common size of 6.5″, which can be installed in most cars without any fitment issues.

The subwoofers have a bit more diverse size options, and their size actually depends mainly on the size of the trunk. The most popular sizes are 10″, 12″, or 15″.

How Much Does a Woofer or Subwoofer Cost?

The woofers can cost anywhere from $30 to $200, depending on the quality and features. As for the subwoofers, they can cost anywhere from $100 to $1000, again depending on the quality and features.

What Is the Difference Between a Coaxial Speaker and a Component Speaker?

The main difference between coaxial and component speakers is that coaxial speakers have the tweeter and woofer in the same housing.

In contrast, component speakers have the tweeter and woofer in separate housings.

Additionally, component speakers typically provide better sound quality than coaxial speakers.

Can I Use a Subwoofer Without a Box?

You can use a subwoofer without a box, but it will not perform as well as it would with a box. The enclosure helps to increase the bass response, increases the sound pressure, and protects the subwoofer from damage.

Do Subwoofers Come With an Amplifier?

Unless there are active models, most subwoofers do not come with an amplifier. Therefore, you will need to purchase an amplifier separately to power the subwoofer.

Következtetés

In conclusion, there are many differences between woofers and subwoofers, including their size, frequency range, and price.

Woofers are smaller and lighter than subwoofers and cover frequencies between 60 Hz and 2 kHz, while subwoofers cover frequencies between 20 Hz and 200 Hz.

Additionally, subwoofers cost more than woofers and need an amplifier to function correctly, while many woofers can be powered by the car radio.

When choosing between a woofer and a subwoofer, you must consider the size of the vehicle, the type of music you typically listen to, and your budget.

If you are looking for deep bass and are on a tight budget, then standard woofers in the coaxial speakers will do the job.

If you are looking for a better sound dynamic and are willing to spend more money, then a subwoofer is the way to go.


  1. Mi a különbség a 3G és WiMax ?
  2. Mi a különbség a 3G és 4G hálózat ?
  3. Mi a különbség az SD és MMC ?
  4. Mi a különbség a MV- 8000 és az MV -8800 ?
  5. A különbség Single és Dual mélynyomók ​​